6PCS Screw Extractor Set Easy Out Drill Bits Guide Broken Screws Bolt Remover

- Complete with Accessories: The kit includes a screw extractor bit for removing damaged, peeled or broken screws of all common sizes.The screw extractor set works with any drill and any size screw or bolt.

- Simple to Do: set your drill to reverse/counterclockwise and use a slower drilling speed. Use a drill/polished tip to start extracting and drill down to create a clean hole. Switch the drill to the extraction tip and use consistent downward pressure (and slow speed) to "bite" the extraction tip into the damaged screw.

- Titanium Coating: Each drill has a hard titanium coating that increases the hardness of each bit, helping them penetrate tough metals, stay sharp longer and prevent rust and corrosion.

- Improved Design: Damaged screw remover tool kit improves on the traditional design with a total of 5 drill sizes and full titanium plating.This titanium plated screw remover and extractor kit is made from High-Speed Steel HSS 4341, which have high hardness of 63hrc, it's durable and easily to remove any damaged screws.

Specification:

Material: HSS steel, surface titanium-coated

Color: Gold

Quantity: 6 pieces

Size: No. 0, No. 1, No. 2, No. 3, No. 4

Extractor size:

#0 Removal diameter 1-3 mm

#1 Distance diameter 3-5 mm

#2 Distance diameter 4-8 mm 

#3 Distance diameter 5-10 mm

#4 Distance diameter 6-12 mm 

What Material Can Be Taken Out?

The extractor is made of 4341 high speed steel.

Most screws on the market are iron and ordinary steel, which can be taken.

If it is made of stainless steel, the bit end of the extractor can hardly be drilled, and take out screws are easy to slip, so it is not applicable.

Please confirm the extracted objects material before purchasing!

What Screw Cannot Taken Out?

(A)Very rusty

(B)stainless steel

How To Operate And Use For Novices?

The drill speed shall not be too fast, use low speed, hold strength and take out it.

User Manual:

1 First, make sure the screws you are using are smaller than the ones you want to remove.

2. make sure there is enough space for the next step to pull out the hole in the correct size.

3. start slowly, drill holes in the screw head or bolt and cut the size. A conical hole is formed to facilitate extraction.

4. turn the bit to one side of the extractor. Turn the bit over and start slowly so that the thread remains engaged. 5.

5. continue tightening or drilling until the bolt or screw is completely removed and can be easily removed in seconds.

Package Including:

1 x Screw Extractor Set